Document Details

  Get-InstalledModule -Name Az
  

    $TempASRJob = New-AzRecoveryServicesAsrReplicationProtectedItem -AzureToAzure -AzureVmId $VM.Id -Name (New-Guid).Guid -ProtectionContainerMapping $EusToWusPCMapping -AzureToAzureDiskReplicationConfiguration $diskconfigs -RecoveryResourceGroupId $RecoveryRG.ResourceId -RecoveryProximityPlacementGroupId $targetPpg.Id -RecoveryAvailabilityZone "2"
    

   #Get the target resource group to be used.
   $ResourceGroup = Get-AzResourceGroup -Name "VMwareToAzureDrPs"

   #Get the target virtual network to be used.
   $RecoveryVnet = Get-AzVirtualNetwork -Name "ASR-vnet" -ResourceGroupName "asrrg"

   #Get the protection container mapping for the replication policy named ReplicationPolicy.
   $PolicyMap = Get-AzRecoveryServicesAsrProtectionContainerMapping -ProtectionContainer $ProtectionContainer | where PolicyFriendlyName -eq "ReplicationPolicy"

   #Get the protectable item that corresponds to the virtual machine CentOSVM1.
   $VM1 = Get-AzRecoveryServicesAsrProtectableItem -ProtectionContainer $ProtectionContainer -FriendlyName "CentOSVM1"

   # Enable replication for virtual machine CentOSVM1 by using the Az.RecoveryServices module 2.0.0 onward to replicate to managed disks.
   # The name specified for the replicated item needs to be unique within the protection container. Use a random GUID to ensure uniqueness.
   $Job_EnableReplication1 = New-AzRecoveryServicesAsrReplicationProtectedItem -VMwareToAzure -ProtectableItem $VM1 -Name (New-Guid).Guid -ProtectionContainerMapping $PolicyMap -ProcessServer $ProcessServers[1] -Account $AccountHandles[2] -RecoveryResourceGroupId $ResourceGroup.ResourceId -logStorageAccountId $LogStorageAccount.Id -RecoveryAzureNetworkId $RecoveryVnet.Id -RecoveryAzureSubnetName "Subnet-1" -RecoveryProximityPlacementGroupId $targetPpg.Id
   

   Get-AzRecoveryServicesAsrReplicationProtectedItem -ProtectionContainer $ProtectionContainer | Select FriendlyName, ProtectionState, ReplicationHealth
   

    #Get the resource group that the virtual machine must be created in when it's failed over.
    $RecoveryRG = Get-AzResourceGroup -Name "a2ademorecoveryrg" -Location "West US 2"

    #Specify replication properties for each disk of the virtual machine that will be replicated (create disk replication configuration).
    #Make sure to replace the variable $OSdiskName with the OS disk name.

    #OS Disk
    $OSdisk = Get-AzDisk -DiskName $OSdiskName -ResourceGroupName "A2AdemoRG"
    $OSdiskId = $OSdisk.Id
    $RecoveryOSDiskAccountType = $OSdisk.Sku.Name
    $RecoveryReplicaDiskAccountType = $OSdisk.Sku.Name

    $OSDiskReplicationConfig = New-AzRecoveryServicesAsrAzureToAzureDiskReplicationConfig -ManagedDisk -LogStorageAccountId $EastUSCacheStorageAccount.Id -DiskId $OSdiskId -RecoveryResourceGroupId $RecoveryRG.ResourceId -RecoveryReplicaDiskAccountType $RecoveryReplicaDiskAccountType -RecoveryTargetDiskAccountType $RecoveryOSDiskAccountType

    #Make sure to replace the variable $datadiskName with the data disk name.

    #Data disk
    $datadisk = Get-AzDisk -DiskName $datadiskName -ResourceGroupName "A2AdemoRG"
    $datadiskId1 = $datadisk[0].Id
    $RecoveryReplicaDiskAccountType = $datadisk[0].Sku.Name
    $RecoveryTargetDiskAccountType = $datadisk[0].Sku.Name

    $DataDisk1ReplicationConfig  = New-AzRecoveryServicesAsrAzureToAzureDiskReplicationConfig -ManagedDisk -LogStorageAccountId $EastUSCacheStorageAccount.Id -DiskId $datadiskId1 -RecoveryResourceGroupId $RecoveryRG.ResourceId -RecoveryReplicaDiskAccountType $RecoveryReplicaDiskAccountType -RecoveryTargetDiskAccountType $RecoveryTargetDiskAccountType

    #Create a list of disk replication configuration objects for the disks of the virtual machine that will be replicated.

    $diskconfigs = @()
    $diskconfigs += $OSDiskReplicationConfig, $DataDisk1ReplicationConfig

    #Start replication by creating a replication protected item. Use a GUID for the name of the replication protected item to ensure uniqueness of the name.

    $TempASRJob = New-AzRecoveryServicesAsrReplicationProtectedItem -AzureToAzure -AzureVmId $VM.Id -Name (New-Guid).Guid -ProtectionContainerMapping $EusToWusPCMapping -AzureToAzureDiskReplicationConfiguration $diskconfigs -RecoveryResourceGroupId $RecoveryRG.ResourceId -RecoveryProximityPlacementGroupId $targetPpg.Id
    

    #Get the resource group that the virtual machine must be created in when it's failed over.
    $RecoveryRG = Get-AzResourceGroup -Name "a2ademorecoveryrg" -Location "West US 2"

    #Specify replication properties for each disk of the virtual machine that will be replicated (create disk replication configuration).
    #Make sure to replace the variable $OSdiskName with the OS disk name.

    #OS Disk
    $OSdisk = Get-AzDisk -DiskName $OSdiskName -ResourceGroupName "A2AdemoRG"
    $OSdiskId = $OSdisk.Id
    $RecoveryOSDiskAccountType = $OSdisk.Sku.Name
    $RecoveryReplicaDiskAccountType = $OSdisk.Sku.Name

    $OSDiskReplicationConfig = New-AzRecoveryServicesAsrAzureToAzureDiskReplicationConfig -ManagedDisk -LogStorageAccountId $EastUSCacheStorageAccount.Id -DiskId $OSdiskId -RecoveryResourceGroupId $RecoveryRG.ResourceId -RecoveryReplicaDiskAccountType $RecoveryReplicaDiskAccountType -RecoveryTargetDiskAccountType $RecoveryOSDiskAccountType

    $diskconfigs = @()
    $diskconfigs += $OSDiskReplicationConfig

    #Data disk

    # Add data disks
    Foreach( $disk in $VM.StorageProfile.DataDisks)
    {
 	    $datadisk = Get-AzDisk -DiskName $datadiskName -ResourceGroupName "A2AdemoRG"
        $dataDiskId1 = $datadisk[0].Id
        $RecoveryReplicaDiskAccountType = $datadisk[0].Sku.Name
        $RecoveryTargetDiskAccountType = $datadisk[0].Sku.Name
        $DataDisk1ReplicationConfig  = New-AzRecoveryServicesAsrAzureToAzureDiskReplicationConfig -ManagedDisk -LogStorageAccountId $EastUSCacheStorageAccount.Id `
             -DiskId $dataDiskId1 -RecoveryResourceGroupId $RecoveryRG.ResourceId -RecoveryReplicaDiskAccountType $RecoveryReplicaDiskAccountType `
             -RecoveryTargetDiskAccountType $RecoveryTargetDiskAccountType
        $diskconfigs += $DataDisk1ReplicationConfig
    }

    #Start replication by creating a replication protected item. Use a GUID for the name of the replication protected item to ensure uniqueness of the name.

    $TempASRJob = New-AzRecoveryServicesAsrReplicationProtectedItem -AzureToAzure -AzureVmId $VM.Id -Name (New-Guid).Guid -ProtectionContainerMapping $EusToWusPCMapping -AzureToAzureDiskReplicationConfiguration $diskconfigs -RecoveryResourceGroupId $RecoveryRG.ResourceId -RecoveryProximityPlacementGroupId $targetPpg.Id
    

    Get-AzRecoveryServicesAsrReplicationProtectedItem -ProtectionContainer $PrimaryProtContainer | Select FriendlyName, ProtectionState, ReplicationHealth
    

    #Create a cache storage account for replication logs in the primary region.
    $WestUSCacheStorageAccount = New-AzStorageAccount -Name "a2acachestoragewestus" -ResourceGroupName "A2AdemoRG" -Location 'West US' -SkuName Standard_LRS -Kind Storage


    #Use the recovery protection container, the new cache storage account in West US, and the source region VM resource group. 
    Update-AzRecoveryServicesAsrProtectionDirection -ReplicationProtectedItem $ReplicationProtectedItem -AzureToAzure -ProtectionContainerMapping $WusToEusPCMapping -LogStorageAccountId $WestUSCacheStorageAccount.Id -RecoveryResourceGroupID $sourceVMResourcegroup.ResourceId -RecoveryProximityPlacementGroupId $vm.ProximityPlacementGroup.Id
    

      $VMFriendlyName = "Fabrikam-app"          #Name of the VM
      $ProtectableItem = Get-AzRecoveryServicesAsrProtectableItem -ProtectionContainer $protectionContainer -FriendlyName $VMFriendlyName
      

      $OSType = "Windows"          # "Windows" or "Linux"
      $DRjob = New-AzRecoveryServicesAsrReplicationProtectedItem -ProtectableItem $VM -Name $VM.Name -ProtectionContainerMapping $ProtectionContainerMapping -RecoveryAzureStorageAccountId 	$StorageAccountID -OSDiskName $OSDiskNameList[$i] -OS $OSType -RecoveryResourceGroupId $ResourceGroupID -RecoveryProximityPlacementGroupId $targetPpg.Id
      

      $DRjob = Get-AzRecoveryServicesAsrJob -Job $DRjob
      $DRjob | Select-Object -ExpandProperty State

      $DRjob | Select-Object -ExpandProperty StateDescription
      

      $nw1 = Get-AzVirtualNetwork -Name "FailoverNw" -ResourceGroupName "MyRG"

      $VMFriendlyName = "Fabrikam-App"

      $rpi = Get-AzRecoveryServicesAsrReplicationProtectedItem -ProtectionContainer $protectionContainer -FriendlyName $VMFriendlyName

      $UpdateJob = Set-AzRecoveryServicesAsrReplicationProtectedItem -InputObject $rpi -PrimaryNic $VM.NicDetailsList[0].NicId -RecoveryNetworkId $nw1.Id -RecoveryNicSubnetName $nw1.Subnets[0].Name

      $UpdateJob = Get-AzRecoveryServicesAsrJob -Job $UpdateJob

      $UpdateJob | Select-Object -ExpandProperty state

      Get-AzRecoveryServicesAsrJob -Job $job | Select-Object -ExpandProperty state