Proposed Pull Request Change

📄 Document Links

View on GitHub View on Microsoft Learn

--- title: Predeployment checklist to deploy Azure Stack Edge Pro 2 device | Microsoft Docs description: This article describes the information that can be gathered before you deploy your Azure Stack Edge Pro 2 device. services: databox author: sipastak ms.service: azure-stack-edge ms.topic: article ms.date: 03/22/2022 ms.author: sipastak --- # Deployment checklist for your Azure Stack Edge Pro 2 device This article describes the information that can be gathered ahead of the actual deployment of your Azure Stack Edge Pro 2 device. Use the following checklist to ensure you have this information after you’ve placed an order for an Azure Stack Edge Pro 2 device and before you’ve received the device. ## Deployment checklist | Stage | Parameter | Details | |-----------------------------------|-------------------------------------------------|-----------------------------------------------| | Device management | - Azure subscription. <br> - Resource providers registered. <br> - Azure Storage account.|- Enabled for Azure Stack Edge, owner or contributor access. <br> - In Azure portal, go to **Home > Subscriptions > Your-subscription > Resource providers**. Search for `Microsoft.EdgeOrder` and register. Repeat for `Microsoft.Devices` if deploying IoT workloads. <br> - Need access credentials. | | Device installation | One power cable in the package. <!--<br>For US, an SVE 18/3 cable rated for 125 V and 15 Amps with a NEMA 5-15P to C13 (input to output) connector is shipped.--> | For more information, see the list of [Supported power cords by country](azure-stack-edge-technical-specifications-power-cords-regional.md) | | | - At least one X 1-GbE RJ-45 network cable for Port 1. <br> - At least 100-GbE QSFP28 Passive Direct Attached Cable (tested in-house) for each data network interface Port 3 and Port 4 to be configured. <br> - At least one 100-GbE network switch to connect a 1 GbE or a 100-GbE network interface to the Internet for data.| Customer needs to procure these cables.| | First-time device connection | Laptop whose IPv4 settings can be changed. This laptop connects to Port 1 via a switch or a USB to Ethernet adapter. </li><!--<li> A minimum of 1 GbE switch must be used for the device once the initial setup is complete. The local web UI will not be accessible if the connected switch is not at least 1 Gbe.</li>-->| | | Device sign-in | Device administrator password, between 8 and 16 characters, including three of the following character types: uppercase, lowercase, numeric, and special characters. | Default password is *Password1*, which expires at first sign-in. | | Network settings | Device comes with 2 x 10/1-GbE, 2 x 100-GbE network ports. <br> - Port 1 is used to configure management settings only. One or more data ports can be connected and configured. <br> - At least one data network interface from among Port 2 to Port 4 needs to be connected to the Internet (with connectivity to Azure). <br> - DHCP and static IPv4 configuration supported. | Static IPv4 configuration requires IP, DNS server, and default gateway. | | Advanced networking settings | - Require 2 free, static, contiguous IPs for Kubernetes nodes, and one static IP for IoT Edge service. <br> - Require one additional IP for each extra service or module that you'll deploy.| Only static IPv4 configuration is supported.| | (Optional) Web proxy settings |Web proxy server IP/FQDN, port |HTTPS URLs are not supported. | | Firewall and port settings | If using firewall, make sure the [listed URLs patterns and ports](azure-stack-edge-pro-2-system-requirements.md#url-patterns-for-firewall-rules) are allowed for device IPs. | | | (Recommended) Time settings | Configure time zone, primary NTP server, secondary NTP server. | Configure primary and secondary NTP server on local network. <br> - If local server isn’t available, public NTP servers can be configured. | | (Optional) Update server settings | Require update server IP address on local network, path to WSUS server. | By default, public windows update server is used.| | Device settings | - Device fully qualified domain name (FQDN). <br> - DNS domain. | | | (Optional) Certificates | To test non-production workloads, use [Generate certificates option](azure-stack-edge-gpu-deploy-configure-certificates.md#generate-device-certificates) <br><br> If you bring your own certificates including the signing chain(s), [Add certificates](azure-stack-edge-gpu-deploy-configure-certificates.md#bring-your-own-certificates) in appropriate format.| Configure certificates only if you change the device name and/or DNS domain. | | Activation | Require activation key from the Azure Stack Edge resource. | Once generated, the key expires in three days. | ## Next steps Prepare to deploy your [Azure Stack Edge Pro device](azure-stack-edge-pro-2-deploy-prep.md).